M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Uživatelský manuál stáhnout pdf (Strana 3)

*insert FigAD_2_Digi001FrontPanel.psd*

Figure D.2 Digi 001 Front Panel.

The pair of analog audio inputs provided on the front panel of the interface can accept

either mic-level or line-level signals. The input sockets are combined XLR and 1/4-in.

jack types, so you can plug either of these commonly used connectors into the Digi 001.

The “pad” switches provided for each input reduce the input sensitivity by 26 dB when

you want to use line-level signals instead of microphones. The phantom power switches

are labeled “48 V,” which is the voltage supplied to power the microphones. A pair of

input gain controls is also provided. Gain controls for the line inputs, three to eight on the

back of the Digi 001 interface, are provided in software so that you can use these with

mixers, preamps, keyboards, or other line-level sources.

*insert FigAD_3_Digi001RearPanel.psd*

Figure D.3 Digi 001 Rear Panel.

A pair of Monitor Outputs is provided on the back panel. These carry the same audio

signals that are routed to analog outputs 1 and 2. The difference is that they are intended

to let you listen to your main mix by hooking up a pair of powered speakers or a stereo

power amplifier and speakers. A Monitor Volume control is provided on the front panel

of the Digi 001 interface to control the listening level.

1 2 3 4 5 6 7 8 ... 70 71

Žádné komentáře

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Uživatelský manuál Strana 3